Last Modified: 11-29-2007 1.6 J
Service Category: Vehicle Interior Section: Seat
Model Year: 2008 Model: Sequoia Doc ID: RM000001YWN005X
Title: SEAT: REAR POWER SEAT CONTROL SYSTEM: DESCRIPTION (2008 Sequoia)

Power Source Circuit

DESCRIPTION

Power is supplied to the fold seat control ECU through the L1 RR2 SEAT*1, L2 RR2 SEAT*1, R1 RR2 SEAT*2 and R2 RR2 SEAT*2 fuses.

*1: LH Side

*2: RH Side

WIRING DIAGRAM



INSPECTION PROCEDURE

PROCEDURE

1.

INSPECT FUSE


(a) Remove the L1 RR2 SEAT, L2 RR2 SEAT, R1 RR2 SEAT and R2 RR2 SEAT fuses from the engine room relay block.

(b) Remove the ECU-IG No. 2 fuse from the main body ECU.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

ECU-IG No. 2 fuse

Always

Below 1 Ω

L1 RR2 SEAT fuse

Always

Below 1 Ω

L2 RR2 SEAT fuse

Always

Below 1 Ω

R1 RR2 SEAT fuse

Always

Below 1 Ω

R2 RR2 SEAT fuse

Always

Below 1 Ω

OK

2.

CHECK HARNESS AND CONNECTOR (POWER SOURCE)


(a) Disconnect the O33 and O34 or P19 and P20 ECU connectors.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

LH Side

Tester Connection

Condition

Specified Condition

O33-4 (+B) - Body ground

Always

11 to 14 V

O33-10 (+B2) - Body ground

Always

11 to 14 V

O34-3 (IG) - Body ground

Ignition switch off

Below 1 V

Ignition switch ON

11 to 14 V

RH Side

Tester Connection

Condition

Specified Condition

P19-4 (+B) - Body ground

Always

11 to 14 V

P19-4 (+B2) - Body ground

Always

11 to 14 V

P20-3 (IG) - Body ground

Ignition switch off

Below 1 V

Ignition switch ON

11 to 14 V

OK

3.

CHECK HARNESS AND CONNECTOR (GROUND)


(a) Disconnect the O33 or P19 ECU connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

LH Side

Tester Connection

Condition

Specified Condition

O33-8 (GND) - Body ground

Always

Below 1 Ω

O33-9 (GND2) - Body ground

Always

Below 1 Ω

RH Side

Tester Connection

Condition

Specified Condition

P19-8 (GND) - Body ground

Always

Below 1 Ω

P19-9 (GND2) - Body ground

Always

Below 1 Ω

OK